Bambu Lab A1 mini
Budget; the AMS lite costs more bought later than in the combo
The cheapest printer that removes tinkering entirely. Full calibration runs on every job, setup is about 15 minutes with nothing to square or level, and the print that comes off it looks like the print off a machine three times the price. For a first printer, a desk, or a child, nothing else at this money is close.
The 180 mm bed is the whole compromise and owners hit it fast. It is also open frame, so ABS and ASA are officially not recommended and never will be, and the smell has nothing to contain it in a shared room. Buy the AMS lite in the combo or not at all: bought later it costs more than the bundle discount saved.
Best at: Removing every reason a first print fails.
Worst at: The bed, which is outgrown within months.
| Build volume | 180 × 180 × 180 mm |
|---|---|
| Footprint | 347 × 315 × 365 mm M |
| Frame | Open bedslinger |
| Nozzle | 300 °C; stainless stock, hardened costs extra M |
| Bed | 80 °C |
| Materials | PLA, PETG, TPU and PVA rated ideal; ABS, ASA, PC and filled filaments not recommended M |
| Colors | 4 with the AMS lite |
| Calibration | Automatic, every job |
| Flow | 28 mm³/s |
| Camera | Yes, about 0.5 fps in remote view; no failure detection MV |
| Firmware | Closed; WiFi only, no Ethernet M |
| Noise | Not published ? |
| Warranty | 2 years M |
M manufacturer figure V measured by an owner or reviewer ? unverified
Check the current price at Bambu Lab ↗manufacturer store; not an affiliate link
