Bambu Lab H2D
Expensive; the AMS 2 Pro combo costs more
Dual nozzles, a heated 65 °C chamber, 350 °C hotends and up to 24 filaments across chained AMS units. The second nozzle is the point: support material or a second color without purging, which is what makes multicolor production runs economical.
It is expensive before the AMS. The price only computes when prints are income; for a hobby the P2S does most of this at less than a third. It is also the same closed ecosystem as every Bambu, at four figures.
Best at: Selling prints, and soluble supports.
Worst at: Hobby value, and lock-in at this price.
| Build volume | 350 × 320 × 325 mm; 300 mm wide with both nozzles |
|---|---|
| Frame | Enclosed CoreXY, 65 °C chamber |
| Nozzle | Two, 350 °C, hardened steel |
| Bed | 120 °C |
| Colors | Up to 24 across chained AMS units |
| Calibration | Automatic, plus vision encoder option |
| Camera | Two, including nozzle macro |
| Firmware | Closed; cloud or LAN mode |
| Noise | Not published ? |
| Warranty | 2 years in the US from Bambu Store purchases; extruder 3 months; hotend, nozzle and build plates not covered M |
M manufacturer figure V measured by an owner or reviewer ? unverified
Check the current price at Bambu Lab ↗manufacturer store; not an affiliate link
