Creality K2 Plus
Upper mid-range; the CFS color units cost more
350 mm cubed with a chamber actively heated to 60 °C and a 350 °C nozzle, which is the combination ABS, ASA, PA-CF and PC actually need, and the reason to buy this over the K1 generation. Belt tension senses itself, the bed levels by strain sensor, and dual AI cameras watch the job.
The CFS is a filament swapper rather than independent nozzles, so multi-color jobs purge heavily, and Creality’s own material documentation excludes PVA and BVOH, which contradicts the soluble support claim in its marketing. The carbon filter ships only partially filled and there is no HEPA stage.
Best at: Engineering materials at volume, with a chamber that is genuinely heated.
Worst at: Multicolor, which purges heavily and cannot do soluble supports.
| Build volume | 350 × 350 × 350 mm |
|---|---|
| Footprint | 495 × 515 × 640 mm M |
| Frame | Enclosed CoreXY |
| Chamber | Actively heated to 60 °C M |
| Nozzle | 350 °C, hardened stock |
| Bed | 120 °C |
| Materials | ABS, ASA, PA-CF and PC natively; no PVA or BVOH |
| Colors | 1 standalone; up to 16 with four CFS units |
| Calibration | Automatic, every job |
| Speed | 600 mm/s, 30,000 mm/s², 40 mm³/s |
| Filtration | Carbon only, partially filled from the factory V |
| Noise | 45 dB at 300 mm/s, under 50 dB at speed M |
| Warranty | 1 year, extendable to 2 M |
M manufacturer figure V measured by an owner or reviewer ? unverified
Check the current price at Creality ↗manufacturer store; not an affiliate link
