Qidi Q2C
Mid-range
The Q2 with the chamber heater removed, which makes it the cheapest enclosed CoreXY carrying a 370 °C nozzle. For PLA, PETG and TPU behind walls, in a room where an open frame would be a nuisance, it does the job for mid-range money.
The missing chamber heater is the whole story: ABS and nylon warp on large flat parts, and the 370 °C nozzle is a ceiling the machine cannot reach in practice. There is no camera, no filtration, spares ship from overseas, and the firmware is still maturing in public.
Best at: An enclosure and a high-temperature nozzle for mid-range money.
Worst at: ABS and nylon, which need the chamber heat it does not have.
| Build volume | 270 × 270 × 256 mm |
|---|---|
| Footprint | 402 × 438 × 494 mm |
| Frame | Enclosed CoreXY |
| Chamber | Passive, no heater |
| Nozzle | 370 °C |
| Bed | 120 °C |
| Materials | PLA, PETG and TPU reliably; ABS and nylon warp on large parts |
| Colors | 1 |
| Filtration | None |
| Speed | 600 mm/s, 20,000 mm/s² |
| Camera | Costs extra |
| Firmware | Open firmware, closed hardware |
| Noise | Not published ? |
| Warranty | 1 year M |
M manufacturer figure V measured by an owner or reviewer ? unverified
Check the current price at Qidi ↗manufacturer store; not an affiliate link
