Sovol SV08 Max
Upper mid-range
A 500 mm cubed build volume, which is the largest on this site and the point of the machine. Eddy-current bed scanning calibrates it without touching the plate, the hardware CAD is published for community mods, and nothing else offers this volume for upper mid-range money.
Tom’s Hardware headlines its review “the noisy giant” and reports the optional enclosure does not meaningfully quiet it. The chamber heater is a reserved interface rather than a fitted part, so the PA and PC compatibility Sovol claims depends on your room and an aftermarket enclosure. Budget about two hours to build it.
Best at: The largest build volume here, by a wide margin.
Worst at: Noise, which the enclosure does not fix.
| Build volume | 500 × 500 × 500 mm; 450 mm tall with the enclosure fitted |
|---|---|
| Footprint | 700 × 710 × 750 mm |
| Frame | Open CoreXY; enclosure costs extra |
| Chamber | Unheated; the heater is a reserved interface, not a fitted part |
| Nozzle | 300 °C |
| Bed | 100 °C |
| Colors | 1 |
| Calibration | Automatic, every job, eddy-current non-contact scanning |
| Speed | 700 mm/s, 40,000 mm/s², 50 mm³/s |
| Camera | 1280 × 720 with time-lapse |
| Assembly | Flat-packed kit; about 2 hours measured V |
| Firmware | Open source, hardware CAD published |
| Noise | Not published ?; reviewed as the noisy giant V |
| Warranty | 1 year; extruder 3 months; nozzles and plates excluded M |
M manufacturer figure V measured by an owner or reviewer ? unverified
Check the current price at Sovol ↗manufacturer store; not an affiliate link
